Datatool Veto series FAQs


How can we help?

Datatool Veto series

Can I buy a new remote?

Unfortunately remotes for the Veto series alarms are no longer available new from Datatool. It may be possible to find one online or via a mobile installer.

Can you tell me how to remove my alarm?

We cannot provide details on how to remove or bypass any of our alarm systems in the interests of protecting the many thousands of customers who continue to rely on the security provided by their Datatool alarm. Please consult your local dealer or mobile installer for assistance. Our dealer locator is here.

Can you send me a wiring diagram to install my alarm?

We cannot provide a wiring diagram for any Thatcham approved product, please contact your local dealer or mobile installer for further assistance. A list of Datatool dealers and mobile installers can be found here.

How do I remove the motorcycle battery without affecting the alarm?

Place the alarm in ‘Service/Valet’ mode before attempting to remove the vehicle battery. Detailed instructions are available in the Veto Evo User Guide

Can you send me an insurance certificate?

The fitting certificate is only valid at time of installation. If your alarm was fitted after August 2015, you may have an online account with Datatool and can download a certificate from there. If you are not the original owner of the alarm or the alarm was fitted prior to August 2015, we recommend you contact your local dealer who will be able to issue suitable confirmation that the alarm is fitted and is fully operational. There may be a charge from your dealer for this.

The LED wires have been damaged, what can I do?

You can order a replacement LED from your local dealer. The LED is the same for any of the Thatcham approved alarms (Veto, System 3 and S4).

Where can I buy a new remote control?

Unfortunately new remote controls for the Veto series alarms are no longer available. Occasionally used remotes are available for sale from the mobile installers (see Dealer Locator ) or via eBay.

Unfortunately remotes for the Veto series alarms are no longer available new from Datatool. It may be possible to find one online or via a mobile installer.
We cannot provide details on how to remove or bypass any of our alarm systems in the interests of protecting the many thousands of customers who continue to rely on the security provided by their Datatool alarm. Please consult your local dealer or mobile installer for assistance. Our dealer locator is here.
We cannot provide a wiring diagram for any Thatcham approved product, please contact your local dealer or mobile installer for further assistance. A list of Datatool dealers and mobile installers can be found here.
Place the alarm in ‘Service/Valet’ mode before attempting to remove the vehicle battery. Detailed instructions are available in the Veto Evo User Guide
The fitting certificate is only valid at time of installation. If your alarm was fitted after August 2015, you may have an online account with Datatool and can download a certificate from there. If you are not the original owner of the alarm or the alarm was fitted prior to August 2015, we recommend you contact your local dealer who will be able to issue suitable confirmation that the alarm is fitted and is fully operational. There may be a charge from your dealer for this.

You can order a replacement LED from your local dealer. The LED is the same for any of the Thatcham approved alarms (Veto, System 3 and S4).

Unfortunately new remote controls for the Veto series alarms are no longer available. Occasionally used remotes are available for sale from the mobile installers (see Dealer Locator) or via eBay.

Downloads Datatool Veto Evo & Veto Plus